User Documentation
452516390000/03/07.2018
Cleaning and maintaining the machine
7.10 Lubricatingthestrippinggradeadjustment
wheel
► Make sure that the machine is switched off.
► Remove the power plug.
Detach the housing:
► Open the front ap.
► Remove all housing screws that are not provided with
locking paint (red).
► Remove the earthing wire that connects the housing
with the at plug distributor by pulling it out of the dis-
tributor.
Figure 7.8 Flat plug distributor
► Place the machine on its left side.
Figure 7.9 Machinelyingonitsleftside
► Spray Teon spray in the gap between adjustment
wheel and cover.
► Turn the adjustment wheel with the Allen key until
end-to-end lubrication can be detected.
Figure 7.10 Gap
► Lubricate the spherical pressure pieces (2) with the
Teon spray.
► Spray the Teon spray under the screw head (3) with-
out releasing the screw.
3
2
Figure 7.11 Lubrication points
WARNING
Potential risk of fatality due to electric
shock!
► Put the earthing wire back on the at
plug distributor when installing the hous-
ing.
► Assembly in reverse order.