User Documentation
Cleaning and maintaining the machine
2516390000/03/07.201844
7.6 Cleaningthestrandedwirexingunit
Figure 7.5 trandedwirefixing
► Clean the xing contour with a brush
7.7 Checkthestrippingblade
1
Figure 7.6 Stripping unit
► Check the blade (1).
► If necessary, replace the blades (see section 8.4).
7.8 Cleaning the interior
► Remove the waste container (see section 7.4).
► Clean the inside of the machine with a brush and, if
necessary, with a vacuum cleaner.
Never use compressed air for cleaning the inside,
because otherwise small parts (e.g. stripping resi-
dues) become inaccessible on the inside of the
machine. This may result in function faults and
operational stoppages.
7.9 Lubricating the crimping drum
3
2
Figure 7.7 Crimping drum
► Lubricate the support (2) and bearing (3) of the crimp-
ing drum with Teon spray.