User Documentation
432516390000/03/07.2018
Cleaning and maintaining the machine
7.4 Emptyingwastecontainers
Depending on the thickness of the stripped material, the
waste container should be emptied after every 2,000 to
6,000 cycles.
The waste container must also be emptied after each in-
stance of transport or shipping.
► Pull out the waste container and empty it.
Figure 7.2 Waste container
► Re-insert the waste container.
7.5 Cleaningwire-holdingtongs
► Clean the wire-holding tongs with a brush.
Figure 7.3 Wire-holdingtongs,fromfront
Additionalmonthlymaintenance:
► Grease the holding tongs at the guide grooves (1) of
the rollers.
1
Figure7.4 Guidegroove,fromtheside