User Documentation
292516390000/03/07.2018
Content
1 About this documentation 30
2 Generalsafetynotes 31
2.1 Intended use 31
2.2 Material that can be processed and crimping shape 31
2.3 Safety equipment 31
2.4 Personnel 31
3 Device description 32
3.1 Technical data 34
3.2 Type plate 34
4 Transportingandsettingupthemachine 35
4.1 Installation location 35
4.2 Transporting the machine 35
4.3 Unpacking the delivery 35
4.4 Scope of delivery 35
4.5 Establishing connections 35
5 Setting up the machine 36
5.1 Adjusting the stripping grade 36
5.2 Performing a stripping test 36
5.3 Setting the crimping die size 37
5.4 Inserting wire-end ferrules 38
5.5 Changing the wire-end ferrule reel 38
6 Operating the machine 39
6.1 Normal operation 39
6.2 Inserting the wire 39
6.3 Filling level monitoring 39
6.4 Counter menu 39
6.5 Reset the day's piece quantity 40
6.6 Service counter 40
6.7 Service display 40
7 Cleaningandmaintainingthemachine 41
7.1 Cleaning the machine externally 41
7.2 Machine maintenance 41
7.3 Maintenance schedule 42
7.4 Emptying waste containers 43
7.5 Cleaning wire-holding tongs 43
7.6 Cleaning the stranded wire xing unit 44
7.7 Check the strippingblade 44
7.8 Cleaning the interior 44
7.9 Lubricating the crimping drum 44
7.10 Lubricating the stripping grade adjustment wheel 45
7.11 Greasing the machine's shafts and guideways 46
7.12 Greasing grooves 46
8 Troubleshooting 47
8.1 Fault table 47
8.2 Error messages 48
8.3 Wear parts 49
8.4 Replacing stripping blades 49
8.5 Replacing sleeve-cutting blades 50
8.6 Removing ferrules 51
8.7 Replacing fuses 51
8.8 Status menu 51
8.9 Inching mode 52
9 Takingthemachineoutofoperationanddisposingofit 53
9.1 Taking the machine out of operation 53
9.2 Disposing of the machine 53
APPENDIX
Electrical connection layout 316
Declaration of conformity 317
Manufacturer
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
T +49 5231 14-0
F +49 5231 14-292083
www.weidmueller.com
Document No 2516390000
Revision 03/July 2018