User Documentation
Table Of Contents
- 1.1 Revision history
- 1.2 Validity
- 1.3 Contact address
- Table of contents
- 2. Observed standards
- 3. Acronyms and abbreviations
- 4. Purpose of the product
- 5. Assumptions and restrictions for use of the product
- 6. Functional specification of the safety functions
- 7. Functional specification of the non-safety functions
- 8. Safety parameters
- 9. Failure category SIL 2
- 10. Hardware and software configuration
- 11. Periodic proof test procedure
- 12. Procedures to repair or replace the product
- 13. Maintenance
- 14. Connection diagram
Procedures to repair or replace the product
1482850000/01/11.2017 15
12. Procedures to repair or replace the product
Any failures that are detected and that compromise functional safety should be reported to the sales
department at Weidmüller Interface GmbH & Co. KG.
Repair of the device and replacement of circuit breakers must be done by
Weidmüller Interface GmbH & Co. KG only.