User Documentation

SIL concept for DTMs
1482900000/01/11.2017 33
The end user must ensure that the applied sensor including wiring has a
failure rate qualifying it for the safety application without the detection
enabled.
Downscale (0 mA) = output is 0 mA at sensor error
Downscale (3.5 mA) = output is 3.5 mA at sensor error (NE43 downscale)
Upscale (23 mA) = output is 23 mA at sensor error (NE43 upscale)
RESP
Analogue output response time in seconds:
Range is 0.0 to 60.0 s