Document of Conformity

IECEx Certificate

of Conformity

Certificate No.: IECEx UL 18.0100X

Date of issue: 2019-03-24

Page 3 of 3

Issue No: 0

EQUIPMENT:

Equipment and systems covered by this Certificate are as follows:

SPECIFIC CONDITIONS OF USE: YES as shown below:

Annex:

Annex to IECEx UL 18.0100X Issue 0.pdf

This device is an Analog temperature monitor, which contains two relay outputs, and a PTC sensor or PT100 input terminal blocks. When

the PT100 or PTC sensor's input temperature is over-temperature or under-temperature, the relay output changes. These units do not

have a complete electrical enclosure and must be placed into a separate enclosure in the final installation.

Please see Annex for additional information.

The equipment shall be installed in an enclosure that provides a minimum ingress protection of IP54 in accordance with IEC 60079-0.