Approval/Certificate/Document of Conformity

Job Id:
262.1
-
027459
-
2
Certificate No: TAA00001JH
Revision No: 1
Form code: TA 251 Revision: 2016-12
www.dnvgl.com
Page 2 of 3
Product description
The universally configurable DC isolating amplifier ACT20P-PRO DCDC II-S/P isolates and converts
analogue signals. An analogue input signal (current or voltage) is linearly converted into an analogue
output signal (current or voltage) and galvanically isolated.
The power supply is galvanically isolated from input and output (3-way isolation).
Power supply:
24 … 230V DC+/-20%
24 … 230V AC+/-10% @ 48 … 62Hz
Input signal range:
Voltage: +/-20mV … +/-300V
Current: +/-0.1mA … +/-100mA
Output signal range:
Voltage: 0 … +/-10V
Current: 0 … +/-20mA / 4 … 20mA
General data:
Degree of protection: IP20
Mounting: on a TS 35 DIN rail
Housing material: PA66 GF30
Connection type: Srew (indicated by -S)
Connection type: Push-in (indicated by -P)
Front LED for indication operation status
Approval conditions
The Type Approval covers hardware listed under Product description. When the hardware is used in
applications to be classed by DNV GL, documentation for the actual application is to be submitted for
approval by the manufacturer of the application system in each case. Reference is made to DNV GL rules
for classification of ships Pt.4 Ch.9 Control and monitoring systems.
Application/Limitation
EMC in the range 2 GHz to 6 GHz according to DNVGL-CG-0339, December 2019 has not been verified.
EMC up to 6 GHz must additionally be documented for installation on ships contracted for construction
on or after 2022-01-01.
Type Approval documentation
Test report Prelectronics: ACT20P-PRO DCDC Marine (V2R0 / 2015-06-12)
Test report Delta: DANAK-19/15072 (2015-03-20)
Operating instruction: R.T.Nr. 1536830000/00/11.14
Drawings enclosures, Part lists 5822-1SMD, 5822-2SMD, 5822L (2015-04-29)
Schematic-PCB 5822-1-07 (2015-04-23)
Technical Specifications ACT20P-PRO DCDC II-S 1536830000/02/06-2017
Technical Specifications ACT20P-PRO DCDC II-P 2508060000/02/06-2017
Type approval assessment report issued at Hamburg on 2020-06-10
Tests carried out
Applicable tests according to class guideline DNVGL-CG-0339, December 2019.
Marking of product
The products to be marked with:
- manufacturer name
- model name
- serial number
- power supply ratings