Document of Conformity

ManualsBrandsWeidmueller ManualsAnalogue Signal ConditioningACT20P-CI-2CO-P-P

[13] Schedule

[14] TYPE EXAMINATION CERTIFICATE No.

DEMKO 18 ATEX 1861X Rev. 1

00-IC-F0060-1 – Issue 15.1 This certificate may only be reproduced in its entirety and without any change, schedule included. Page 2 of 3

[15] Description of Product:

These devices are considered Open-Type Analogue Signal Converter, which can connect with 2- or 3- wire transmitter or current source

signal. The input and output circuits and the voltage supply are completely electrically isolated. The input signal is converted into a DC

current or voltage value. These units do not have a complete electrical enclosure and are to be installed in Industrial Control Equipment in

the final installation.

Nomenclature for type ACT20P Series:

ACT20P

2CI

2CO

1: Product series:

ACT20P

2: Input signal:

CI: Type with one channel of current input signal

2CI: Type with two channels of current input signal

3: Output signal:

CO: type with one channel of current output signal

2CO: type with two channels of current output signal

VO: type with one channel of voltage output signal

4: Variants Width:

Blank: 12.5mm width, for models except for ACT20P-2CI-2CO series

12: 12.5mm width, only for ACT20P-2CI-2CO series

5. Din rail bus power connector:

Blank: Normal type

P: Type support Din rail bus power connector

6: Input/Output connector type:

S: Type with screw connector

P: Type with push-in connector

The optical radiation output of the product with respect to explosion protection, according to Annex II clause 1.3.1 of the Directive

2014/34/EU is covered in this certificate based on Exception 1) to the scope of EN 60079-28:2015.

Temperature range:

The ambient temperature range is -20 C to +60 C.

Electrical data

Cat. No.

Supply

Input

Output

Current Range

Signal input

Voltage

Current

ACT20P-CI-VO-S

ACT20P-CI-VO-P

ACT20P-CI-VO-P-S

ACT20P-CI-VO-P-P

20-30 V dc, 60 mA

0~20 mA or

4~20 mA

2- or 3-wire transmitter,

current source

0~10 V or

2~10 V

ACT20P-CI-CO-S

ACT20P-CI-CO-P

ACT20P-CI-CO-P-S

ACT20P-CI-CO-P-P

20-30 V dc, 60 mA

0~20 mA or

4~20 mA

2- or 3-wire transmitter,

current source

0~20 mA or

4~20 mA

ACT20P-CI-2CO-S

ACT20P-CI-2CO-P

ACT20P-CI-2CO-P-S

ACT20P-CI-2CO-P-P

20-30 V dc, 75 mA

0~20 mA or

4~20 mA

2- or 3-wire transmitter,

current source

0~20 mA or

4~20 mA

ACT20P-2CI-2CO-12-S

ACT20P-2CI-2CO-12-P

ACT20P-2CI-2CO-12-P-S

ACT20P-2CI-2CO-12-P-P

20-30 V dc, 100 mA

0~20 mA or

4~20 mA

current source

0~20 mA or

4~20 mA

Routine tests:

N/A

[16] Descriptive Documents

The scheduled drawings are listed in the report no. provided under item no. [ 8 ] on page 1 of this Type Examination Certificate.