Datasheet
Data sheet...
W-Series
WNT 70N/35
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Accessories
Creation date November 19, 2012 2:52:11 PM CET
Catalogue status 06.11.2012 / We reserve the right to make technical changes. 9
ZB 4
In the switching facilities and controllers, the N conductor
may need to be merged with the PE conductor at a
central point. For this reason, busbars are available that
allow a wide range of cables to be connected within a
confined space (up to 70 wires on one metre of rail).
The cables are connected via a compression piece or
a clamping yoke. For the first variant there is no need
to bend the lugs. A guide lug at the compression piece
grips into the busbar and holds tightly to the compression
piece. The clamping yokes can be moved on the busbar
and adjusted to the whole wiring in the facility. The
busbar can be used without holes in various lengths. The
rail holding clamp SH is used for fastening. On longer
rails, it can also be aligned between clamping yokes.
General ordering data
Order No. Type Version GTIN (EAN) Qty.
0316500000 ZB 4 Accessories, Clamping yoke
for busbar, Rated cross-
section: Clamping yoke
4008190061999 50 pc(s).
SSCH
In the switching facilities and controllers, the N conductor
may need to be merged with the PE conductor at a
central point. For this reason, busbars are available that
allow a wide range of cables to be connected within a
confined space (up to 70 wires on one metre of rail).
The cables are connected via a compression piece or
a clamping yoke. For the first variant there is no need
to bend the lugs. A guide lug at the compression piece
grips into the busbar and holds tightly to the compression
piece. The clamping yokes can be moved on the busbar
and adjusted to the whole wiring in the facility. The
busbar can be used without holes in various lengths. The
rail holding clamp SH is used for fastening. On longer
rails, it can also be aligned between clamping yokes.
General ordering data
Order No. Type Version GTIN (EAN) Qty.
0348900000 SSCH 10X3X1000 CU/SN Accessories, Busbar,
Copper, 1000 mm
4008190024802 1 m