Datasheet
Datenblatt
HDC insert
HDC HA 16 MT 17-32
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technische Daten
Erstellungs-Datum January 27, 2014 8:53:54 AM CET
Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 2
Dimensions and weights
Length 73 mm
Width 23 mm
Height 29 mm
Net weight 57 g
Dimensions
Height of plug 29 mm
Total length base 73 mm
General data
Size 5
Series HA
Rated voltage (DIN EN 61984) 250 V
Rated voltage according to UL/CSA 600 V AC/DC
Rated impulse voltage (DIN EN 61984) 4 kV
Rated current (DIN EN 61984) 16 A
UL 94 flammability rating V-0
Insulating material group IIIa
Insulation resistance
10
10
Ω
Insulating material PC glass-fibre reinforced
(UL-listed and railway-
certified)
Conductor cross-section 2.5 mm²
No. of poles 16
Plugging cycles, silver ≥ 500
Operating temperature range, min. -40 °C
Operating temperature range, max. 125 °C
Pollution severity
3
Type Male
Connection data PE
Stripping length PE connection
10 mm
Wire connection cross-section, finely
stranded, min. 0.5 mm²
Wire connection cross section, finely
stranded, max.
2.5 mm²
Cross-section for connected conductor,
finely stranded with wire-end ferrules
and plastic collars DIN 46228/4, rated
connection, min. 0.5 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules and
plastic collars DIN 46228/4, rated
connection, max. 2.5 mm²
Wire connection cross section AWG,
min.
AWG 24
Wire connection cross section AWG,
max. AWG 14
Wire cross-section, solid, min.
0.5 mm²
Wire cross-section, solid, max. 2.5 mm²
Connection type PE Screw connection
Tightening torque, min. PE connection 1.2 Nm
Tightening torque, max. PE connection 1.5 Nm
Rated cross-section 2.5 mm²
Fixing screw M 4
Blade size, crosshead size PH1
Blade size, slotted (PE connection) SD 0.8 x 4.0
Rating data
Rated current (DIN EN 61984) 16 A
Rated impulse voltage (DIN EN 61984) 4 kV
Rated voltage (DIN EN 61984) 250 V
Rated voltage according to UL/CSA 600 V AC/DC
Version
Wire connection cross section AWG,
min. AWG 24
Wire connection cross section AWG,
max. AWG 14
Stripping length, rated connection 8 mm
Type of connection Tension clamp connection
Size 5
Volume resistance ≤ 2mΩ
Blade size, slotted (screw connection) SD 0.5 x 3.0
Surface finish
Silver passivated
Material Copper alloy