Datasheet
Datenblatt
P-series
PPE 16
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technische Daten
Erstellungs-Datum January 27, 2014 8:52:51 AM CET
Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 2
Dimensions and weights
Length 81 mm
Width 12.1 mm
Height 47.5 mm
Height of lowest version
48 mm
Net weight 49.9 g
Temperatures
Operating temperature
Storage temperature
Continuous operating temp., min. -50 °C
Continuous operating temp., max. 120 °C
Rated data IECEx/ATEX
Certificate No. (ATEX) KEMA06ATEX0177U
ATEX certificate IECEXKEM06.0032U
ATEX certificate KEMA06ATEX0177U_e.pdf
Certificate No. (IECEX) IECEXKEM06.0032U
IEC Ex certificate IECEXKEM06.0032U_e.pdf
Wire cross section max. (ATEX) 16 mm²
Wire cross section max. (IECEX) 16 mm²
Voltage, cross-connection CrossConnectionGuide.pdf
Operating temperature range For operating temperature
range see EC Design
Test Certificate / IEC Ex-
Certificate of Conformity
Marking EN 60079-7
Ex e II
Marking ATEX Directive 94/9/EC II 2 G D
Additional technical data
Explosion-tested version Yes
Installation advice Direct mounting
Open sides right
Type of mounting
Snap-on
Version PUSH IN connection, With
PE connection, for plug-in
cross-connector, One end
without connector
CSA ratings data
Certificate No. (CSA) 200039-1751332
Wire cross section max. (CSA)
4 AWG
Wire cross section min. (CSA) 14 AWG
Clampable wires (rated connection)
Type of connection PUSH IN
Stripping length 18 mm
Blade size 1.0 x 5.5 mm
Connection direction top
Clamping range, rated connection, min. 2.5 mm²
Clamping range, rated connection, max. 16 mm²
Gauge to IEC 60947-1
B6
Wire connection cross section, solid
core, max. rated connection 2.5 mm²
Wire connection cross section, solid
core max. rated connection 16 mm²
Wire connection cross section, finely
stranded, max. 16 mm²
Wire connection cross-section, finely
stranded, min. 2.5 mm²
Finely stranded, max. (rated connection)
16 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, min. 2.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, max. 16 mm²
Cross-section for connected conductor,
finely stranded with wire-end ferrules
and plastic collars DIN 46228/4, rated
connection, min. 2.5 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules and
plastic collars DIN 46228/4, rated
connection, max. 10 mm²