Datasheet
Datenblatt
P-series
PPE 2.5/4/4AN
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technische Daten
Erstellungs-Datum January 27, 2014 8:52:47 AM CET
Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 2
Dimensions and weights
Length 80 mm
Width 5.1 mm
Height 38 mm
Height of lowest version
39 mm
Net weight 15.86 g
Temperatures
Operating temperature
Storage temperature
Continuous operating temp., min. -50 °C
Continuous operating temp., max. 120 °C
Rated data IECEx/ATEX
Certificate No. (ATEX) KEMA06ATEX0177U
ATEX certificate IECEXKEM06.0032U
ATEX certificate KEMA06ATEX0177U_e.pdf
Certificate No. (IECEX) IECEXKEM06.0032U
IEC Ex certificate IECEXKEM06.0032U_e.pdf
Wire cross section max. (ATEX) 4 mm²
Wire cross section max. (IECEX) 4 mm²
Voltage, cross-connection CrossConnectionGuide.pdf
Operating temperature range For operating temperature
range see EC Design
Test Certificate / IEC Ex-
Certificate of Conformity
Marking EN 60079-7
Ex e II
Marking ATEX Directive 94/9/EC II 2 G D
Additional technical data
Explosion-tested version Yes
Open sides right
Type of mounting
Snap-on
Version PUSH IN connection, With
PE connection, One end
without connector
CSA ratings data
Certificate No. (CSA) 200039-1751332
Wire cross section max. (CSA)
10 AWG
Wire cross section min. (CSA) 26 AWG
Clampable wires (rated connection)
Type of connection PUSH IN
Stripping length 12 mm
Blade size 3.0 x 0.5 mm
Connection direction top
Number of connections 4
Clamping range, rated connection, min. 0.13 mm²
Clamping range, rated connection, max. 6 mm²
Gauge to IEC 60947-1 A3
Wire connection cross section, solid
core, max. rated connection 0.5 mm²
Wire connection cross section, solid
core max. rated connection 6 mm²
Wire connection cross section, finely
stranded, max. 4 mm²
Wire connection cross-section, finely
stranded, min. 0.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, min. 0.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, max. 4 mm²
Cross-section for connected conductor,
finely stranded with wire-end ferrules
and plastic collars DIN 46228/4, rated
connection, min. 0.5 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules and
plastic collars DIN 46228/4, rated
connection, max. 4 mm²
Twin wire-end ferrules, min. 0.5 mm²
Twin wire-end ferrules, max. 1.5 mm²
Wire connection cross section AWG,
min. AWG 26
Wire connection cross section AWG,
max. AWG 10