Datasheet
Datenblatt
HDC insert
HDC CM HE 4 MC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technische Daten
Erstellungs-Datum January 16, 2014 8:25:13 AM CET
Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 2
Dimensions and weights
Length 34 mm
Width 11.4 mm
Height 39.5 mm
Net weight 10.6 g
Dimensions
Height of plug 39.5 mm
Total length base 34 mm
General data
Series ConCept module
Rated voltage (DIN EN 61984) 630 V
Rated impulse voltage (DIN EN 61984) 8 kV
Rated current (DIN EN 61984) 25 A
UL 94 flammability rating
V-0
Insulation resistance
10
12
Ω
Insulating material PC glass-fibre reinforced
(UL-listed and railway-
certified)
No. of poles
4
Pollution severity 3
Type Male
Connection data PE
Wire connection cross section AWG,
min. AWG 20
Wire connection cross section AWG,
max.
AWG 12
Connection type PE Screw connection via
module frame
Rating data
Rated current (DIN EN 61984) 25 A
Rated impulse voltage (DIN EN 61984)
8 kV
Rated voltage (DIN EN 61984) 630 V
Version
Wire connection cross section AWG,
min. AWG 20
Wire connection cross section AWG,
max. AWG 12
Stripping length, rated connection 7.5 mm
Type of connection Crimp connection
Volume resistance
≤ 2mΩ
Material Polycarbonate, glass fibre
reinforced
Classifications
ETIM 3.0 EC001121
UNSPSC 30-21-18-01
eClass 5.1 27-14-34-19
eClass 6.2
27-14-34-19
eClass 7.1 27-44-05-15
Product information
Descriptive text ordering data Combine this module with the HE crimp contacts. Crimp contacts should be ordered separately.
Descriptive text technical data Rated voltage 1000 V / 8 kV at pollution severity level 2. For conductor cross-sections ≤ 0.75 mm², you must
use wire-end ferrules at the connection to the PE conductor.
When used properly and as designated, the listed connectors may not be connected or disconnected if voltage/
load is present!
When used in the metal frame, reduction of the voltage to 500 V / 6.0 kV must be noted!
Descriptive text accessories Accessories, see chapter J - Tools, see chapter K