Datasheet
Datenblatt
P-series
PDL 4 S/NT/L/PE
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technische Daten
Erstellungs-Datum January 15, 2014 11:59:05 AM CET
Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 2
Dimensions and weights
Length 100 mm
Width 5.1 mm
Height 48 mm
Height of lowest version
48.5 mm
Net weight 20.58 g
Temperatures
Operating temperature
Storage temperature
Continuous operating temp., min. -50 °C
Continuous operating temp., max. 120 °C
Additional technical data
Explosion-tested version No
Installation advice Direct mounting
Open sides right
Type of mounting
Snap-on
Version PUSH IN connection, NT,
L and PE connection,
with busbar connection
10x3, for plug-in cross-
connector, One end
without connector
Clampable wires (rated connection)
Type of connection PUSH IN
Stripping length 12 mm
Blade size 3.0 x 0.5 mm
Connection direction top
Clamping range, rated connection, min. 0.08 mm²
Clamping range, rated connection, max. 4 mm²
Gauge to IEC 60947-1
A3
Wire connection cross section, solid
core, max. rated connection 0.5 mm²
Wire connection cross section, solid
core max. rated connection 4 mm²
Wire connection cross section, stranded,
rated connection, min. 1.5 mm²
Wire connection cross section, stranded,
rated connection, max. 4 mm²
Wire connection cross section, finely
stranded, max. 4 mm²
Wire connection cross-section, finely
stranded, min.
0.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, min. 0.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, max.
4 mm²
Cross-section for connected conductor,
finely stranded with wire-end ferrules
and plastic collars DIN 46228/4, rated
connection, min. 0.5 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules and
plastic collars DIN 46228/4, rated
connection, max. 2.5 mm²
Twin wire-end ferrules, min.
0.5 mm²
Twin wire-end ferrules, max.
1.5 mm²
Wire connection cross section AWG,
min. AWG 26
Wire connection cross section AWG,
max. AWG 12
Rated data
Rated cross-section 4 mm²
Rated voltage 400 V
Rated impulse withstand voltage
6 kV
Rated impulse withstand voltage to
adjacent terminal 6 kV
Rated current 32 A
Current at maximum wires 36 A
Standards IEC 60947-7-1 (-7-2)
Pollution severity 3