Datasheet
Datenblatt
Z terminal with tension spring connection
ZDU 2.5 S
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technische Daten
Erstellungs-Datum January 15, 2014 10:10:11 AM CET
Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 2
Dimensions and weights
Length 61 mm
Width 5.1 mm
Height 43.15 mm
Height of lowest version
44 mm
Net weight 5.94 g
Temperatures
Operating temperature
Storage temperature
Continuous operating temp., min. -50 °C
Continuous operating temp., max. 120 °C
Additional technical data
Explosion-tested version Yes
Installation advice Direct mounting
Open sides right
Type of mounting
Snap-on
Version Tension-clamp connection,
for plug-in cross-connector,
One end without
connector
Clampable wires (additional connection)
Conductor cross-section, flexible plus
plastic collar DIN 46228/1, further
connection, min. 0.5 mm²
Conductor cross-section, flexible plus
plastic collar DIN 46228/1, further
connection, max. 2.5 mm²
Clampable wires (rated connection)
Type of connection Tension clamp connection
Stripping length 10 mm
Blade size 0.6 x 3.5 mm
Connection direction Inclined / angled
Number of connections 2
Clamping range, rated connection, min. 0.5 mm²
Clamping range, rated connection, max. 4 mm²
Gauge to IEC 60947-1 A2
Wire connection cross section, solid
core, max. rated connection 0.5 mm²
Wire connection cross section, solid
core max. rated connection 4 mm²
Wire connection cross section, finely
stranded, max. 4 mm²
Wire connection cross-section, finely
stranded, min. 0.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, min. 0.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, max. 2.5 mm²
Cross-section for connected conductor,
finely stranded with wire-end ferrules
and plastic collars DIN 46228/4, rated
connection, min. 0.5 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules and
plastic collars DIN 46228/4, rated
connection, max. 2.5 mm²
Wire connection cross section AWG,
min. AWG 26
Wire connection cross section AWG,
max. AWG 14
N-conductor disconnect terminal
For N-busbar 10 x 3 mm
Rated data
Rated cross-section 2.5 mm²
Rated voltage 400 V
Rated impulse withstand voltage 6 kV
Rated current 24 A
Current at maximum wires 24 A
Standards
IEC 60947-7-1
Pollution severity 3