User manual
5 Detailed descriptions of the eldbus coupler | PROFINET eldbus coupler UR20-FBC-PN-IRT
48 1432790000/08/12.2015Manual u-remote
Overview of editable parameters UR20-FBC-PN-IRT
Parameter Optional values Default
IP address 4 numbers between 0 and 255
Subnet mask 4 numbers between 0 and 255
Gateway 4 numbers between 0 and 255
Webserver via Ethernet* disabled / enabled enabled
IP address USB port* 192.168.1.202; 192.168.2.202, 192.168.3.202, 192.168.4.202,
192.168.5.202
192.168.1.202
Process alarm disabled / enabled disabled
Diagnostic alarm disabled / enabled disabled
Type of diagnosis Extended channel diagnostic (short diagnostic) /
Vendor-specic diagnostic (complete diagnostic)
Extended channel diagnostic (short diagnostic)
Output behaviour on eldbus error All outputs off / Enable substitute value / Hold last value All outputs off
Module behaviour on hot swap Continue data exchange / Behaviour like eldbus error Continue data exchange
Data format Motorola / Intel Motorola
Lock force mode Force mode unlocked / Force mode locked Force mode unlocked
* Change requires restart of the eldbus coupler.