User manual

5 Detailed descriptions of the eldbus coupler | PROFINET eldbus coupler UR20-FBC-PN-IRT
47Manual u-remote1432790000/08/12.2015
Technical data UR20-FBC-PN-IRT (Order No. 1334880000)
System data
Connection
2 x RJ-45
Fieldbus protocol
PROFINET IO (IRT, RT)
Redundancy protocol
MRP
Process image
Input data width max. 512 Byte
Output data width max. 512 Byte
Parameter data max. 4362 Byte
Diagnostic data max. 1408 Byte
Number of modules
max. 64 active
Configuration interface
Micro USB 2.0
Transfer rate
Fieldbus max. 100Mbps
u-remote system bus max. 48 Mbps
Fast start-up
1)
< 500ms with a maximum of 10 modules
Supply
Supply voltage for system and inputs
24VDC +20 % / -15 %
Supply voltage for outputs
24VDC +20 % / -15 %
Max. feed-in current for input modules
10A
Max. feed-in current for output modules
10A
Current consumption from system current path I
SYS
116mA
Connection data
Type of connection
“PUSH IN”
Conductor cross-section
Single-wired, ne-wired 0.14 – 1.5mm
2
(AWG 16 – 26)
Weight
Weight (operational status)
220 g
General data, see Section 3.2
1) To enable Fast Start-up media redundancy (MRP) must be deactivated on PLC start up.