User manual
10 Webserver | Review the IP address of the USB connection
459Manual u-remote1432790000/08/12.2015
Loading a firmware file
▶ If you would like to carry out a firmware update for indi-
vidual modules in the u-remote station, click on Add job.
▶ You can also use the relevant firmware file for this pur-
pose.
Once the rmware le has been loaded, the Options area
shows which modules can be updated with this le.
▶ Tick or untick the boxes so that only those modules that
are to be updated are ticked.
▶ Once you have called up all the required firmware files
and you have selected the modules as required, click on
Start.
The rmware is updated. For each job ticket, progress of the
data upload is displayed in the Info area. Once the data has
been transferred, the job ticket is marked with a green out-
line.
Firmware data successfully transferred
▶ T
o complete the firmware update, click
Close and restart the coupler (power reset).
10.12 Review the IP address of the USB connec-
tion
You can review the IP address in the Network and Sharing
Center, which is found in the Windows Control Panel:
▶ Under Unidentified network, click on LAN connec-
tion.
The LAN connection status window opens.
LAN connection status
▶ Click on Details.
The Network connection details window opens.