User manual

10 Webserver | Web server in force mode
457Manual u-remote1432790000/08/12.2015
Open the detail view in force mode
Detail view of the station in force mode
All active modules are displayed in the overview. The switch-
able channels are provided with a changeover switch.
Filtering the module view
If you only want to see the modules that you would like to
force, use the lter function.
▶ Click on the Filter bar.
Window with filter function open
Displayed modules are highlighted in colour in the lter bar,
while hidden modules are displayed in white.
Window with filter running
▶ To display or hide modules, go to the filter bar and click
on the module you would like to display or hide.
Resettinglters
▶ To display all modules again, click Display all.
▶ To hide all modules, click Hide all.
Manually switching outputs (forcing)
▶ To switch a channel, click on the corresponding switch in
the station display.
Forcing a channel
▶ To accept an individual change, click on Apply changes.
▶ To accept all changes, click OK.
Modules with registers
Modules with registers (e.g. counter modules and PWM
modules) can be forced individually.
▶ Click on the module.
The Force channel window appears.