User manual

Coupler Status dialogue box
Here you can:
– Reset the coupler to factory default settings
– Change the registration data and set up password protec-
tion to limit access to the web server
– Reset any changes that have been made
– Access the coupler parameters
– Access the coupler's datasheet (link to product designa-
tion)
Resetting the web server
You can undo all the changes that have been made since the
last time that the web server was started.
After a reset, the coupler is restarted! All data
which is not protected against power failure is
reset.
▶ Click on the coupler.
▶ Click on Reset In the coupler status dialogue box.
Resetting changes
▶ To reset changes that have been made, respond to the
prompt by clicking Yes.
Resetting the coupler to factory settings
This function allows you to set up the web server in its origi-
nal state as at delivery. This also includes registration data
and password protection.
▶ Click on the coupler.
▶ In the Coupler Status dialogue box, click on Factory set-
tings.
Resetting the coupler to factory settings
▶ To confirm that you would like to reset the coupler to the
factory settings, respond to the prompt by clicking Yes.
Accessing coupler parameters
▶ Navigate to the Coupler Status dialogue box and click
Parameters.
All the parameters are then listed in a new window.
Editing coupler parameters
For parameters that can be edited, you can enter the
changes in the entry elds or choose alternative settings
from a dropdown menu.
10 Webserver | Displaying and editing the coupler status
453Manual u-remote1432790000/08/12.2015