User manual

You can overwrite a forgotten password as fol-
lows:
▶ Disconnect the coupler from the modules.
▶ Restart the coupler.
▶ Open the status window of the coupler.
▶ Click on Change login data and chose No login infor-
mation.
The old password is now deleted.
10.6 Navigation and operating instructions
Setting the language
When the program is started, the web server attempts to
start with the language set in your web browser. If this lan-
guage is not supported by the web server, the program starts
with the “English” setting.
New language versions are continually being developed and
can be later installed by the user with separate language
les.
▶ To change the language, click on Language and choose
the desired setting.
Setting the language
Zooming the view in/out
▶ Click on the magnifying glass symbol to zoom in or out
on the station's display.
Scaling the display
Quick view of detailed values
▶ Move the cursor slowly over the station without clicking.
The detailed values of the channel on top of which the cursor
is presently situated are displayed.
Display of channel values
10.7 Displaying and editing the coupler status
These functions are only accessible when
Force mode is not activated.
The status data can be displayed at all time,
regardless of the state of the eld bus connec-
tion. Setup changes can only be stored while
the eld bus is not active.
▶ Click on the coupler.
The Coupler Status dialogue box opens.
10 Webserver| Navigation and operating instructions
452 1432790000/08/12.2015Manual u-remote