User manual
A network line which has the subnet name is now displayed
in the conguration window.
Ethernet configuration
Linking a bus coupler
▶ Click on the network line in the configuration window.
▶ In the device catalogue, select the bus coupler (UR20-
FBC-PN-IRT) under PROFINET IO/Additional field
devices/ I/O /UR20 system.
▶ Double-click on the coupler or drag it to the subnet line.
The coupler is added to the subnet.
Linking the coupler
Providing the bus coupler with a device name
▶ Double-click on the bus coupler icon.
The UR20-FBC-PN-IRT properties window opens.
Bus coupler properties
The device name must accord with the name
that has been dened in the device (see
“Setting the properties of the Ethernet partici-
pants”).
▶ Change the device name if required and confirm by press-
ing OK.
All settings only take effect once they have
been loaded into the component/control unit
(see below).
Providing the control unit with a device name
▶ Double-click on PN-IO in the upper window (UR).
The Properties window opens.
▶ Click on the General tab.
▶ Change the Device names as required.
All settings only take effect once they have
been loaded into the component (see below).
9 Commissioning| Commissioning the UR20-FBC-PN-IRT
444 1432790000/08/12.2015Manual u-remote