User manual

Addingaprolerail
▶ In the catalogue, select the profile rail in use (e.g.
SIMATIC 300/RACK-300).
Selecting a profile rail
▶ Double-click on the profile rail or drag it to the left-hand
side of the window using the mouse.
The prole rail (UR) is displayed with the open positions.
Profile rail with open positions
Selecting the control unit version
▶ Click on the second line of the UR table.
▶ From the catalogue, select the control unit in use and its
version (inscription on the control unit, e.g. 317-2EK14-
etc.).
Selecting the control unit version
▶ Double-click on the respective version, or use the mouse
to drag it to the second position in the table on the left-
hand side of the window.
The Ethernet interface properties window opens.
Ethernet interface properties
▶ Enter the designated IP address and the subnet mask.
▶ Click on New.
▶ Enter a name for the subnet (e.g. Ethernet UR20-S1). This
name is assigned to the control unit.
▶ Confirm twice by clicking OK.
9 Commissioning | Commissioning the UR20-FBC-PN-IRT
443Manual u-remote1432790000/08/12.2015