User manual

6 Detailed descriptions of I/O modules | Serial communication module UR20-1COM-232-485-422
385Manual u-remote1432790000/08/12.2015
Serial communication module UR20-1COM-232-485-422 (Order No. 1315750000)
Serial data can be exchanged between the PLC and a
data terminal device using the UR20-1COM-232-485-422
communication module. The device (e.g. barcode
scanner, printer) can be connected via an interface type
RS232, RS485 or RS422. The data transfer rate can be
parameterised between 300 and 115200bps. The process
data length can be parameterised to be 8byte or 16byte. A
terminating resistor can be parameterised for the RS485 and
RS422 interface respectively.
The communication status is indicated by two LEDs on the
respective plug.
The module electronics supply the connected data terminal
device with power from the input current path (I
IN
) either
with 5VDC or 24VDC (parameterisable). Both supply volta-
ge outputs are protected against overcurrent.
4
3
1
2
4
3
1
2
4
3
1
2
4
3
1
4
3
1
2
4
3
1
2
4
3
1
2
4
3
1
4
3
1
2
4
3
1
2
4
3
1
2
4
3
1
1 RS·XXX
1 RS·XXX 1 RS·XXX
5V
GND
24V
GND COM
RS232 RXD
RS232 TXD
RS232 RTS
RS232 CTS
5V
GND
24V
GND COM
RS422 RXD+
RS422 RXD–
485/422 TXD+
485/422 TXD–
RS232 RXD
RS232 TXD
RS232 RTS
RS232 CTS
5V
GND
24V
GND COM
RS232 RXD
RS232 TXD
RS232 RTS
RS232 CTS
RS422 RXD+
RS422 RXD–
485/422 TXD+
485/422 TXD–
RS422 RXD+
RS422 RXD–
485/422 TXD+
485/422 TXD–
RS232
Serial
device
RS485
Serial
device
RS422
Serial
device
TXD+
TXD–
RXD+
RXD–
Connection diagram UR20-1COM-232-485-422
6.50 Serial communication module UR20-1COM-232-485-422