User manual

6 Detailed descriptions of I/O modules | Analogue output module UR20-4AO-UI-16-DIAG
313Manual u-remote1432790000/08/12.2015
Overview of the editable parameters UR20-4AO-UI-16-DIAG
Channel Description Options
1)
Default
0 ... 3 Data format S5 Data format (0) / S7 Data format (1) S7 Data format
0 ... 3 Output range
0
to 20 mA (0) / 4 to 20 mA (1) / 0 to 10 V (2) / -10 to 10 V (3) / 0 to 5 V (4) /
-5
to 5 V (5) / 1 to 5 V (6) / 2 to 10 V (7) /disabled (8)
disabled
0 ... 3 Substitute value depending on the channels data format (S5/S7),
see Table “Output range”
0
0 ... 3 Channel diagnosis disabled (0) / enabled (1) disabled
1) Values in brackets for Modbus-TCP (firmware version 02.00.00 and higher) and EtherCAT