User manual

3 Systemoverview| Module codings
18 1432790000/08/12.2015Manual u-remote
End bracket marker EM 8/30
The end bracket of the u-remote station can be tted with an
end bracket marker (Order No. 1806120000).
End bracket with end bracket marker
The following labels are available for the labelling:
– Paper labels for printing with laser printers
– Order No. 1607720000, ESO 7 white
– Order No. 1634780000, ESO 7 yellow
– Polyester labels for printing with laser printers
– Order No. 1670390000, ESO 7POLY white
– Order No. 1670400000, ESO 7POLY yellow
3.9 Module codings
Position coding
In order to prevent an electronic module being mismated, the
modules can be coded by the customer. Coding is carried
out by two small components: the orange coding socket and
the black coding pin. Three codings can be applied to each
basic module (see chapter 7.3).
Socket and pin for position coding
Basic module with inserted coding sockets
Functional coding
The I/O modules are mechanically coded using three cut-
outs in the circuit board. There are four different function
codes for:
– I/O modules
– Power-feed modules for the input current path
(UR20-PF-I)
– Power-feed modules for the output current path
(UR20-PF-O)
– Safe power-feed modules (UR20-PF-O-xDI-SIL)
1
Electronic unit with coding cut-outs (1) in the PCB