Datasheet

Datenblatt

W-Series
WDK 2.5V BL
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: [phone]
Fax: [phone]
www.weidmueller.com
Technische Daten


Erstellungs-Datum December 13, 2013 11:32:31 AM CET
 Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 2
Dimensions and weights

Length 69.5 mm

Width 5.1 mm
Height 62.5 mm

Height of lowest version 63.5 mm
Weight 14.1 g

Net weight 13.11 g

Temperatures

Operating temperature

Storage temperature
Continuous operating temp., min. -50 °C

Continuous operating temp., max. 120 °C

Rated data IECEx/ATEX

Certificate No. (ATEX) KEMA98ATEX1687U

ATEX certificate KEMA98ATEX1687U_d.pdf
ATEX certificate KEMA98ATEX1687U_e.pdf

IEC Ex certificate IECEXULD05.0008U_e.pdf
Max. voltage (ATEX) 275 V

Current (ATEX) 21 A
Wire cross section max. (ATEX) 2.5 mm²

Voltage, cross-connection CrossConnectionGuide.pdf
Operating temperature range For operating temperature
range see EC Design
Test Certificate / IEC Ex-
Certificate of Conformity

Marking EN 60079-7
Ex e II
Marking ATEX Directive 94/9/EC II 2 G D



Additional technical data

Explosion-tested version Yes

Installation advice Direct mounting
Number of similar terminals 1

Open sides right
Type of mounting
Snap-on

Version Screw connection,
Vertically cross-connected,
for screwable cross-
connection, One end
without connector

CSA ratings data

Certificate No. (CSA) 12400-135

Voltage size C (CSA) 300 V
Current size C (CSA) 10 A

Wire cross section max. (CSA)
12 AWG
Wire cross section min. (CSA) 26 AWG



Clampable wires (additional connection)

Conductor cross-section, flexible plus
plastic collar DIN 46228/1, further
connection, min. 0.5 mm²

Conductor cross-section, flexible plus
plastic collar DIN 46228/1, further
connection, max. 2.5 mm²
