User's Manual

17
34. Wrap the Military Press Cable (72) around a
“V”-Pulley (50). Attach the “V”-Pulley to the
Top Frame (55) with a 3/8” x 2 1/2” Bolt (86)
and a 3/8” Nylon Locknut (21).
Wrap the Military Press Cable (72) around a 3
1/2” Pulley (15). Attach the Pulley, a set of
Pulley Covers (114), and a 3/8” Flat Washer
(9) to the indicated bracket on the Assist Arm
(105) with a 3/8” x 2” Bolt (12) and a 3/8”
Nylon Locknut (21). Be sure that the large
tabs on the Pulley Covers are in the loca-
tion shown and that the Cable and Pulley
move smoothly.
35. Wrap the Military Press Cable (72) around a 3
1/2” Pulley (15). Attach the Pulley and a set of
Pulley Covers (114) to the Assist Upright (74)
with a 3/8” x 3 3/4” Bolt (88), two 3/8” Flat
Washer (9), and a 3/8” Nylon Jam Nut (112).
Be sure that the Cable is routed around
the Pulley as shown.
Wrap the Military Press Cable (72) around a
3 1/2” Pulley (15). Attach the Pulley, a set of
Pulley Covers (114), and a 3/8” Flat Washer
(9) to the other bracket on the Assist Arm
(105) with a 3/8” x 2” Bolt (12) and a 3/8”
Nylon Locknut (21). Be sure that the Cable
and Pulley move smoothly. Be sure that
the large tabs on the Pulley Covers (114)
are in the positions shown.
34
CABLE ASSEMBLY
Bracket
105
9
12
114—Large
tabs should
be here.
50
15
21
21
55
86
72
35
105
9
9
9
112
74
114
114
114
15
12
72
Bracket
Large tabs
should be here.
Large tabs
should be here.
88
15
21