User`s manual

Note: Assembly is divided into four stages: 1) frame assembly, 2) arm
assembly, 3) cable assembly, and 4) seat assembly. The hardware for
each stage is packaged separately. WAIT UNTIL YOU BEGIN EACH
ASSEMBLY STAGE TO OPEN THE PARTS BAG LABELED FOR THAT
ASSEMBLY STAGE.
This chart is provided to help you identify the small parts used in assembly. Important: Some parts may have
been pre-assembled for shipping purposes. If you cannot find a part in the parts bags, check to see if it
has been pre-assembled. The number in parenthesis following each part description refers to the key number
of the part.
REMOVE THIS PART IDENTIFICATION
CHART FROM THE MANUAL
1/2" x 3/4" Spacer (69)
2" Square Inner Cap (56)2" Square Outer Cap (58)
1 3/4" Square Inner Cap (48)
1" Round Outer Cap (46)
1 1/2" Square Inner Cap (57)
1" Round Inner Cap (70)
1" x 7/8" Plastic Bushing (54)
1 1/8" x 2 1/2" Plastic Bushing (47)
3/4" Round Inner Cap (78)
1" Inner Cap (95)