User's Manual

3. Insert the two Weight Guides (62) into the indicat-

ed holes in the Base (4) and the Stabiliser (5). Be

sure that the Weight Guides are oriented with

the holes in the positions shown. Attach the

Weight Guides to the Base and the Stabiliser with

two M10 x 78mm Bolts (14), two 17.5mm

Spacers (77), two M10 Washers (9), and two M10

Nylon Locknuts (21).

Slide two Weight Bumpers (19) onto the Weight

Guides (62).

Hole

4. Slide the nine Weights (25) onto the Weight

Guides (62). Be sure the pin grooves are on

the side shown.

Press the Weight Tube Bumper (72) into the bot-

tom of the Weight Tube (63). Insert the Weight

Tube into the centre hole in the Weights (25). Be

sure the pin on the Weight Tube rests in the

indicated pin groove.

Lubricate the indicated holes in the Top Weight

(56). Slide the Top Weight onto the Weight

Guides (62), with the pin groove on the side

shown.

Groove

Lubricate