User's Manual

10
12. Wrap the High Cable (23) around a “V”-Pulley (6).
Attach the Pulley and a Long Cable Trap (50) to
the bracket on the Top Frame (55) with an M10 x
60mm Bolt (7) and an M10 Nylon Locknut (21).
Be sure the Cable Trap is oriented to hold the
Cable in the groove of the Pulley.
14. Wrap the High Cable (23) around a 90mm Pulley
(15). Attach the Pulley to the Pulley Bracket (20)
with an M10 x 45mm Bolt (88) and an M10 Nylon
Locknut (21).
Attach the Pulley Bracket (20) to the Top Frame
(55) with an M10 Washer (9) and an M10 Nylon
Locknut (21).
13. Wrap the High Cable (23) around a “V”-Pulley (6).
Attach the Pulley and a Long Cable Trap (50) to
the Left Butterfly Arm (47) with an M10 x 60mm
Bolt (7) and an M10 Nylon Locknut (21). Be sure
the Cable Trap is oriented to hold the Cable in
the groove of the Pulley.
Repeat this step with the Right Butterfly Arm
(48).
12
55
23
7
50
21
6
13
14
7
6
50
21
23
47
48
20
21
88
21
9
15
23
55
15. Wrap the High Cable (23) around a 90mm Pulley
(15). Attach the Pulley and a pair of Pulley
Covers (40) to the second set of holes from the
top of the two Pulley Plates (58) with an M10 x
52mm Bolt (12) and an M10 Nylon Locknut (21).
Be sure the small tabs on the Pulley Covers
are on top.
15
21
58
12
40
40
15
23
Small
Tabs
58