User's Manual

20
31. Attach the Backrest (16) to the Upright (3) with
two M6 x 80mm Screws (70) and two M6
Washers (82).
30. Attach the Low Cable (53) to the M10 x 55mm
Bolt (66) used in step 28 with an M10 Locknut
(56).
30
31
16
70
70
82
82
3
Seat Assembly
29. Route the Low Cable (53) over a 90mm Pulley
(48). Attach the Pulley, a Cable Trap (51), and
two Half Guards (43) to the Adjustable U-
b
racket (45) at the second hole from the bottom
with an M10 x 55mm Bolt (66) and an M10
L
ocknut (56).
29
56
43
43
48
45
66
53
56
53
66
51