User's Manual

14
12. Apply grease to an M10 x 90mm Bolt (67) and
two Arm Bushings (44). Attach the Right Arm (9)
to the Pivot Frame (5) with the Button Bolt, the
two Arm Bushings, and an M10 Locknut (56).
D
o not overtighten the Locknut; the Right
Arm must pivot freely.
Attach the Left Arm (10) to the Pivot Frame
(
5) in the same manner.
13. Refer to the CABLE DIAGRAMS on page 26
as you identify and assemble the cables.
Identify the Arm Cable (54). Apply grease to
an M8 x 19mm Shoulder Bolt (65). Attach the
Arm Cable to the indicated Cable Pivot (39) with
the Shoulder Bolt and an M8 Locknut (58).
Make sure that the Cable can pivot freely
around the Shoulder Bolt.
12
10
9
4
4
56
5
67
58
65
54
39
Grease
Grease
Grease
13
Cable Assembly