User's Manual

20
37. Orient the Seat (10) so that the wide end is in
the indicated position.
Attach the Seat (10) to the Seat Frame (2) with
four M8 x 16mm Screws (63) and four Small M8
Washers (74).
37
10
63
74
Wide
End
2
63
74
38. Insert a Pad Tube (19) through the bracket on
the Leg (21). Slide two Small Foam Pads (39)
onto the Pad Tube.
Next, insert the other Pad Tube (19) through the
Leg Lever (3). Slide two Small Foam Pads (39)
onto the Pad Tube.
38
39
39
19
3
21
39
39
19
3
6. Attach the Backrest (11) to the Upright (5) with
two M8 x 42mm Bolts (62) and two Small M8
Washers (74).
36
11
5
6
2
74