User's Manual

12
1
3. Identify the Left Arm (12), which is marked with
an “L” sticker, and orient it as shown.
Apply grease to the axle on the Left Arm (12).
Insert the Left Arm (12) into the Arm Frame (9).
A
ttach the Left Arm with a 5/8" Locknut (75) and
a 5/8" Washer (71). Do not overtighten the
Locknut; the Left Arm must pivot easily.
Then, press a 5/8" Domed Cap (56) onto the
5/8" Locknut (75).
Attach the Right Arm (13) in the same way.
13
12
9
13
56
75
71
14. Slide a Large Foam Pad (48) onto the Left Arm
(12).
Insert a Handle (17) into the Left Arm (12).
Attach the Handle with an M10 x 25mm Screw
(60) and an M10 Washer (73).
Repeat this step for the Right Arm (13).
14
12
13
48
Grease
60
73
17