User's Manual

11
1
0. Apply grease to a 1/2" x 7" Bolt (64).
Orient the Arm Frame (9) as shown.
A
ttach the Arm Frame (9) to the Top Frame (8)
with the 1/2" x 7" Bolt (64), two 1/2" Washers
(
72), and a 1/2" Locknut (70). Do not over-
tighten the Locknut; the Arm Frame must
pivot easily.
10
8
9
64
72
72
70
11. Apply grease to an M8 x 42mm Bolt (62).
Hold the Lock Rod (46) inside the bracket on
the Upright (5). Attach the Lock Rod with the
M8 x 42mm Bolt (62), two Small M8 Washers
(74), and an M8 Locknut (69). Do not over-
tighten the Locknut; the Lock Rod must
pivot easily.
Then, tighten the Lock Knob (45) onto the end
of the Lock Rod (46).
11
12. Apply grease to an M8 x 63mm Bolt (61).
Attach a U-bracket (22) to one side of the
Upright (5) with the M8 x 63mm Bolt (61), two
Small M8 Washers (74), and an M8 Locknut
(69). Do not overtighten the Locknut; the U-
bracket must pivot easily.
Attach the other U-bracket (22) to the
Upright (5) in the same way.
12
5
5
62
74
69
74
45
46
22
Grease
69
74
Grease
61
Grease
74
22