User's Manual

10
7
. Orient the Leg (21) as shown.
Insert the indicated bracket on the Leg (21) into
the Seat Frame (2). Attach the Leg to the Seat
F
rame with an M10 x 93mm Bolt (99), two M10
Curved Washers (20), and an M10 Locknut
(
68); do not tighten the Locknut yet.
Next, attach the Leg (21) to the Long Base (1)
with two M10 x 103mm Bolts (57), four M10
Washers (73), and two M10 Locknuts (68); do
not tighten the Locknuts yet.
7
8. Apply grease to an M10 x 75mm Bolt (94).
Orient the Leg Lever (3) as shown.
Attach the Leg Lever (3) to the Leg (21) with the
M10 x 75mm Bolt (94), two M10 Washers (73),
and an M10 Locknut (68). Do not overtighten
the Locknut; the Leg Lever must pivot eas-
ily.
8
68
68
2
Bracket
1
73
73
20
20
21
99
68
73
73
94
21
3
9. Attach the Top Frame (8) to the Upright (5) with
two M10 x 103mm Bolts (57), four M10
Washers (73), and two M10 Locknuts (68); do
not tighten the Locknuts yet.
Then, attach the Top Frame (8) to the Weight
Guides (4) with two M10 x 25mm Screws (60)
and two M10 Washers (73).
See steps 5 through 9. Tighten all of the M10
Locknuts (68).
9
60
73
8
5
57
4
68
73
73
Grease
57