User's Manual

Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-

ng is the key number of the part, from the PART LIST near the end of this manual. IMPORTANT: If you cannot

find a part in the hardware kit, check to see if it has been preassembled.

PART IDENTIFICATION CHART

M10 x 55mm Bolt (57)M10 x 50mm Bolt (58)

M10 x 35mm Bolt (59)

M10 x 25mm Screw (60)

M8 x 63mm Bolt (61)M8 x 42mm Screw (62)

M10 x 75mm Bolt (66)

1/2" x 6 1/8" Bolt (64)

M8 Locknut (69)

M10 Locknut (68)

M10 Curved Washer (76)

M8 Washer (74)M6 Washer (79) M10 Washer (73)

5/8" Washer (71)

1/2" Washer (72)

13mm Washer (78)

1/2" Nut (84)

5/8" Locknut (75)

1/2" Locknut (70)

26mm Washer (77)

M8 x 16mm

Screw (63)

M8 x 20mm Screw (65)