User's Manual

12
1
3. Identify the Left Arm (12), which is marked with
an “L” sticker, and orient it as shown.
Apply grease to the indicated location on the
L
eft Arm (12).
I
nsert the Left Arm (12) into the Arm Frame (9).
Attach the Left Arm with a 5/8" Locknut (75) and
a 5/8" Washer (71).
Do not overtighten the 5/8" Locknut (75).
The Left Arm (12) must pivot easily.
Then, press a 5/8" Dome Cap (56) onto the 5/8"
Locknut (75).
Repeat this step for the Right Arm (13).
13
12
9
13
56
7
5
71
14. Slide a Large Foam Pad (48) onto the Left Arm
(12).
Insert a Handle (17) into the Left Arm (12).
Attach the Handle with an M10 x 25mm Screw
(60) and an M10 Curved Washer (76).
Slide an Arm Cap (37) upward onto the Left
Arm (12) and press it into place.
Slide a Handgrip (40) over the end of the Left
Arm (12).
Repeat this step for the Right Arm (13).
14
12
48
13
17
37
40
76
60
Grease