User's Manual

11
1
0. Apply grease to a 1/2" x 6 1/8" Bolt (64).
Orient the Arm Frame (9) as shown.
A
ttach the Arm Frame (9) to the Top Frame (8)
with the 1/2" x 6 1/8" Bolt (64), two 1/2"
W
ashers (72), and a 1/2" Locknut (70).
Do not overtighten the 1/2" Locknut (70).
The Arm Frame (9) must pivot easily.
10
8
9
64
72
72
70
11. Apply grease to an M8 x 42mm Screw (62).
Hold the Lock Rod (46) inside the bracket on
the Upright (5).
Attach the Lock Rod (46) to the Upright (5) with
the M8 x 42mm Screw (62), two M8 Washers
(74), and an M8 Locknut (69).
Do not overtighten the M8 Locknut (69). The
Lock Rod (46) must pivot easily.
Tighten the Lock Knob (45) onto the end of the
Lock Rod (46).
11
12. Apply grease to an M8 x 63mm Bolt (61).
Attach a U-bracket (22) to one side of the
Upright (5) with the M8 x 63mm Bolt (61), two
M8 Washers (74), and an M8 Locknut (69).
Do not overtighten the M8 Locknut (69). The
U-bracket (22) must pivot easily.
Attach the other U-bracket (22) to the
Upright (5) in the same way.
12
5
5
69
62
61
74
22
74
69
74
74
45
46
22
Grease
Grease
Grease