User's Manual

10
7
. Orient the two Braces (21) as shown.
Attach the Braces (21) to the Seat Frame (2)
and the Long Base (1) with two M10 x 75mm
B
olts (66), four M10 Washers (73), and two
M10 Locknuts (68).
7
8. Apply grease to an M10 x 75mm Bolt (66).
Orient the Leg Lever (3) as shown.
Attach the Leg Lever (3) to the bracket on the
Seat Frame (2) with the M10 x 75mm Bolt (66),
two M10 Washers (73), and an M10 Locknut
(68).
Do not overtighten the M10 Locknut (68).
The Leg Lever (3) must pivot easily.
8
6
8
68
2
1
73
73
73
73
21
21
66
66
68
73
73
66
2
3
9. Attach the Top Frame (8) to the Upright (5) with
two M10 x 25mm Screws (60) and two M10
Washers (73).
Then, attach the Top Frame (8) to each Weight
Guide (4) with an M10 x 25mm Screw (60) and
an M10 Washer (73).
9
60
73
73
8
5
60
4
60
73
73
Grease