User's Manual

8
5. Apply grease to the barrel of an M10 x 51mm
Bolt Set (24).
A
ttach the Leg Lever (4) to the bracket on the
Front Leg (8) with the M10 x 51mm Bolt Set
(
24). Make sure that the barrel of the Bolt Set
is inserted through both sides of the bracket
on the Front Leg.
24
4
G
rease
2
4
8
5
18
38
4
18
38
10
10
18
38
18
6
6. Insert the two Pad Tubes (10) into the Leg
Lever (4).
Slide two Foam Pads (18) onto each Pad Tube
(10).
Press a Pad Cap (38) into each Foam Pad (18).
7. Orient the Backrest (6) and the two Backrest
Tubes (5) as shown.
Attach the Backrest Tubes (5) to the Backrest
(6) with four M6 x 38mm Screws (22) and four
M6 Washers (20). Do not tighten the Screws
yet.
7
20
20
22
22
5
Holes
6