User's Manual

12
STORING THE WEIGHT BENCH
Before storing the weight bench, remove any
weights from the Leg Lever (4).
To store the weight bench, first remove the Lock Knob
(23) and the Lock Pin (40) from the bracket on the
Crossbar (3).
Next, raise the Frame (2) and the Front Leg (8) to the
position shown.
Then, insert the Lock Pin (40) into the side of the
bracket on the Crossbar (3), and insert the Lock Knob
(23) into the top of the bracket. The Lock Pin will pre-
vent the weight bench from unfolding.
USING THE BARBELL HOOKS
To add or remove weights (not included) while your
b
arbell (not included) is on the Uprights (1), secure
the barbell by rotating the Barbell Hooks (32, 33) over
t
he barbell. This will reduce the chances that the bar-
bell will tip while you are changing weights.
32
33
3
8
4
23
1
40
2
1
WARNING: Do not place more
than 210 lbs. (95 kg) on the weight rests.