User's Manual

3. Attach the Front Leg (8) to the Frame (2) with two
M8 x 40mm Carriage Bolts (41), two M8 Washers
(16), and two M8 Nylon Locknuts (17).
Do not
tighten the Locknuts yet.
4. Lubricate an M10 x 55mm Bolt (40) with grease.
Attach the Frame (2) to the upper set of holes in
the bracket on the Crossbar (3) with the Bolt and
an M10 Nylon Locknut (33). Do not overtighten
the Locknut; the Frame must be able to pivot
easily.
Tighten the Long Adjustment Knob (31) into the
Crossbar (3) and the Frame (2).
5. Tap a 30mm Square Inner Cap (22) into each end
of the Leg Lever (4).
Tap a 25mm Round Inner Cap (24) into the indi-
cated end of the weight tube on the Leg Lever
(4). Tap the 25mm Round Angled Cap (20) onto
the other end of the weight tube.
6. Lubricate the M10 x 63mm Bolt (32) with grease.
Attach the Leg Lever (4) to the bracket on the
Front Leg (8) with the Bolt and an M10 Nylon
Locknut (33).
Note: Do not overtighten the
Locknut; the Leg Lever must be able to pivot
easily
.
3
17
2
41
16
16
40
3
2
8
33
31
4
22
24
W
eight
T
ube
4
20
22
5
33
4
6
Lubricate
32
Lubricate
8
6