User's Manual

10
STORING THE WEIGHT BENCH
T
o store your weight bench, remove the Adjustment
Knob (31) from the bracket on the Crossbar (3). Lift
the Front Leg (8) as far as it will go. Reinsert the
Adjustment Knob into the lower set of holes in the
bracket on the Crossbar, and tighten the Knob into
the welded nut on the bracket.
The Adjustment Knob
will prevent the bench from unfolding.
31
3
8
Welded
Nut
ATTACHING WEIGHTS
To use the Leg Lever (4), slide the desired weights
onto the weight tube on the Leg Lever. Secure the
weights with a Weight Clip (45). Do not place more
than 22 kg (50 lbs.) on the Leg Lever.
See the inset drawing. To use the Fly Arms (25),
make sure there is a Weight Stop (28) on each weight
tube. Next, slide the desired amount of weight onto
the weight tubes. Secure the weights with a Weight
Clip (45). Do not place more than 14 kg (30 lbs.)
on each Arm.
To use some weights, Weight Adapters (42) will need
to be slid onto the Fly Arms (25) or the weight tube on
the Leg Lever (4).
4
28
42
45
25
Weight
Tube
Weight
42
45
Weight
Tube
Weight
WARNING: When using the
Leg Lever (4), place a barbell with the same
amount of weight on the weight rests to
balance the bench.