User's Manual

STORING THE CURL PAD AND LAT TOWER

When the Curl Pad (27) or the Lat Tower (not shown)

is not in use, it can be stored in the storage tube on

the Left Stabiliser (46). However, for some exercises,

you should store these parts away from the weight

bench so they do not interfere with your exercise.

ADJUSTING THE UPRIGHTS

To adjust the Uprights (1), unscrew the M10 x 62mm

Adjustment Knobs (30) and slide the Uprights to the

desired position. Re-tighten the Adjustment Knobs

into the Upright Bases (7) and the Uprights.

USING THE BARBELL HOOKS

To change weights while your barbell (not included) is

on the Uprights (1), secure the barbell with the

Barbell Hooks (56, 61 [not shown]). To do this, rotate

the Barbell Hooks over the barbell. This will reduce

the possibility of the barbell tipping while you are

changing weights.

WARNING:Always set both

Uprights (1) at the same height. Make sure the

M10 x 62mm Adjustment Knobs (30) are fully

tightened into the Upright Bases (7) and

Uprights.

Storage

Tube