User's Manual

Hole

STORING THE WEIGHT BENCH

To store your weight bench, remove the M10 x 57mm

Adjustment Knob (33) and the Ring Pin (43) from the

Crossbar (3). Lift the Front Leg (8) as far as it will go.

Reinsert the Ring Pin into the bracket on the

Crossbar; the Ring Pin will prevent the bench from

unfolding.

Note: The Backrest (6) must be adjusted

to one of the incline positions (see ADJUSTING

THE BACKREST, on page 11).

CAUTION: To fold the weight

bench, the holes in the Stabilisers (45) must

be at least 50 cm (20 in.) from the wall.