User's Manual

7
6. Attach an 108mm Eyebolt (31) to the Top Frame (1)
with an M8 Bright Zinc Washer (55) and an M8
Bright Zinc Nylon Locknut (36).
Do not overtighten
the Locknut; the Eyebolt must be able to pivot
easily.
Repeat this step on the other side of the Top
Frame (1).
31
55
36
31
1
6
7. Slide a Foam Pad (16) onto each side of the
Handlebar (29).
8. Make sure that all parts have been properly tight-
ened. The use of the remaining parts will be
explained in ADJUSTMENTS, beginning on the
next page.
16
7
16
29
4
6
54
54
5
5
40
40
6
5. Attach the Stabiliser (6) to the Adjustment Leg (5)
with three M8 x 52mm Bolts (40), three M8 Black
Zinc Washers (54), and three M8 Black Zinc Nylon
Locknuts (46). Make sure that the head of the
B
olt is in the hexagonal hole in the Stabilizer.