User's Manual

1. Attach the Pulley Guard (59) to the Backrest (4)

with two M6 x 16mm Screws (60) and two M6

Washers (39).

ASSEMBLY

Before beginning assembly, carefully read the

following information and instructions:

• Assembly requires two people.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until assembly is completed.

• As you assemble the weight training system,

make sure all parts are oriented as shown in the

drawings.

• T

ighten all parts as you assemble them, unless

instructed to do otherwise.

• For help identifying small parts, use the PART

IDENTIFICATION CHART.

Assembly may require the included grease and

the following tools (not included):

• Two adjustable wrenches

• One rubber mallet

• One standard screwdriver

• One Phillips screwdriver

• Clear tape or masking tape, and soapy water.

Assembly will be more convenient if you have a

socket set, a set of open-end or closed-end

wrenches, or a set of ratchet wrenches.

Make Things Easier for Yourself

verything in this manual is designed to ensure

that the weight training system can be assem-

led successfully by anyone. Most people find

that by setting aside plenty of time, assembly will

go smoothly.